NMEA Cables & Sensors

Maretron

Maretron TLM100 Tank Level Monitor - 40" Depth Max - No Gas [TLM100-01]

The TLM100 is used to sense levels of liquid tanks using ultrasonic technology and transmit the liquid levels over the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such...

Maretron

Maretron SIM100 Switch Indicator Module [SIM100-01]

SIM100 Switch Indicator ModuleMaretron's Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (heat, smoke, carbon monoxide, explosive vapor detectors), security systems (motion, vibration, glass break,...

Maretron

Maretron RIM100 Run Indicator Module [RIM100-01]

RIM100 Run Indicator ModulePart #: RIM100-01Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally as...

Lowrance

Lowrance Yamaha Engine Interface Cable [120-37]

Yamaha Engine Interface CableYamaha engine interface cable 4.5 m (15 ft) and T-connectorConnects to Yamaha engines without Yamaha CommandLink Plus system.2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225,...

Garmin

Garmin GFS 10 Fuel Sensor for Gas Engines Only [010-00671-00]

GFS™ 10 Fuel SensorAdd fuel tracking capabilities to your Garmin chartplotter and optimize your boat's fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA 2000.Unlike other fuel flow...

Maretron

Maretron Mini Powertap [NF-NM4P-NF]

Mini PowertapA powertap is connected to a network backbone just like any Tee but rather than connecting a device their purpose is to provide "bus" power. Typically a Powertap is placed as central as possible between total devices on backbone. Maretron...

Maretron

Maretron TLA100 NMEA 2000 Tank Level Adapter [TLA100-01]

TLA100 NMEA 2000®Tank Level AdapterThe TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible...

Maretron

Maretron RAA100 Rudder Angle Adapter [RAA100-01]

RAA100 NMEA 2000®Rudder Angle AdapterThe RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000®...

Maretron

Maretron J2K100 NMEA 2000 / J1939 Bridge [J2K100-01]

J2K100 NMEA 2000® / J1939 Bridge (Engine/Transmission/Genset Gateway)Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital...

Maretron

Maretron USB100 NMEA 2000 USB Gateway [USB100-01]

USB100 NMEA 2000® / USB GatewayMaretron's USB100 is a gateway for bridging USB equipment using NMEA 0183 sentences - such as an on-board computer running navigational software - with an NMEA 2000® network. The gateway automatically converts...

Raymarine

Raymarine SeaTalkng Backbone Cable Kit f/ST70 [A25062]

The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. The kit contains the following components:A06031 SeaTalkng Terminators (Qty. 2)A06037 Backbone Cable,...