NMEA Cables & Sensors

Actisense

Actisense Engine Management Unit Analog - NMEA2000 [EMU-1]

Engine Management Unit Analog - NMEA2000Share engine information on the NMEA 2000® bus...The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000...

Actisense

Actisense Micro 4-Way Instrument Drop [A2K-4WD-1]

Micro 4-Way Instrument DropThe Actisense 4-way drop makes it easier to reach up to four devices with a single cable.Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This...

Actisense

Actisense N2K Female/Female Gender Changer - 0.25M [A2K-GCF-0.25M]

N2K Female/Female Gender Changer - 0.25MUse between two cable connectors of the same type and gender. Overcomes the problem of connecting two devices or cables which have the same gender of connector on an NMEA 2000® backbone.Female to Female - 0...

Actisense

Actisense N2K Male/Male Gender Changer - 0.25M [A2K-GCM-0.25M]

N2K Male/Male Gender Changer - 0.25MUse between two cable connectors of the same type and gender. Overcomes the problem of connecting two devices or cables which have the same gender of connector on an NMEA 2000® backbone.Male to Male - 0.25M...

Actisense

Actisense NMEA 2000 Rib Starter Kit [A2K-KIT-3]

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network.Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from...

Actisense

Actisense NMEA AIS Configured Multiplexer [NDC-4-AIS]

NMEA AIS Configured MultiplexerFlexible multiplexing w/preconfigured version for Autoswitching or AIS operation...The Actisense NDC-4 and NDC-4-USB allow up to five OPTO isolated NMEA 0183 sources to be multiplexed into a single stream*.Two flexible...

Actisense

Actisense NMEA Autoswitch [NDC-4-ASW]

NMEA AutoswitchPreconfigured Autoswitch ModeAutoswitch Mode: Intelligent SoftwareDetermines the highest priority device with valid data, based on one of three reasons - a failure to send any NMEA data, an invalid NMEA sentence checksum, or if the...

Actisense

Actisense NMEA0183 Buffer w/6 ISO-Drive Outputs [NBF-3]

NMEA0183 Buffer w/6 ISO-Drive OutputsSafely drive up to six NMEA Listeners, with power distribution for the connected Talker... The Actisense NBF-3 NMEA Buffer isolates and buffers NMEA 0183 data, with the power to drive multiple devices.The NBF-3 can...

Actisense

Actisense NMEA0183 Data Combiner w/RS232 [NDC-4]

NMEA0183 Data Combiner w/RS232Flexible multiplexing w/preconfigured version for Autoswitching or AIS operation...The Actisense NDC-4 and NDC-4-USB allow up to five OPTO isolated NMEA 0183 sources to be multiplexed into a single stream*.Two flexible...

Actisense

Actisense NMEA0183 to NMEA2000 AIS Configured [NGW-1-ISO-AIS]

NMEA0183 to NMEA2000 AIS ConfiguredHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-ISO-AIS is the NMEA 0183 AIS option. This is a pre-configured version of the standard NGW-1-ISO that enables the conversion of NMEA...

Actisense

Actisense NMEA0183 to NMEA2000 w/USB [NGW-1-USB]

NMEA0183 to NMEA2000 w/USBHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-USB is the NMEA 0183 chartplotter option. USB (1.1 and 2.0) interface for bi-dircetional connection to a PC.The Actisense NGW-1 NMEA 2000...

Actisense

Actisense NMEA0183 to NMEA2000 [NGW-1-ISO]

NMEA0183 to NMEA2000Hook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices... NGW-1-ISO is the standard option. With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.The Actisense NGW-1...