NMEA Cables & Sensors

Digital Yacht

Digital Yacht SPL2000 VHF/AIS Powered Antenna Splitter [ZDIGSPL2000]

SPL2000 AIS-VHF Antenna SplitterThe SPL2000 allows the boat's VHF antenna to be used for both an AIS and VHF simultaneously. It uses ZeroLoss technology and is suitable for use with AIS Class B transponder systems as well as AIS receivers. It's also...

Maretron

Maretron FFM100 Fuel Flow Monitor [FFM100-01]

Fuel Flow MonitorPart #: FFM100-01Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering...

Maretron

Maretron NMEA 2000 Network Bus Extender [NBE100-01]

Network Bus ExtenderPart #: NBE100-01Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. The NBE100 solves bus errors and other electrical issues...

Maretron

Maretron DCR100-01 Direct Current Relay Module [DCR100-01]

Maretron's DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000 network, so you can turn on and off the relays from any device onboard or remotely running Maretron's N2KViewr...

Maretron

Maretron FPM100 Fluid Pressure Monitor [FPM100-01]

Fluid Pressure MonitorMaretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the...

Maretron

Maretron GPS200 NMEA 2000 GPS Receiver [GPS200-01]

GPS200 - NMEA 2000 GPS Antenna/ReceiverMaretron's GPS200 provides reliable position fixes 10 times per second, accurate boat speed four times per second, and precision time once per second. The GPS200 antenna/receiver is a plug-and-play device that is...

Maretron

Maretron Direct Current DC Monitor [DCM100-01]

Maretron's DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries,...

Maretron

Maretron ACM100 Alternating Current Monitor [ACM100-01]

ACM100 Alternating Current MonitorMaretron's ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. The ACM100 can monitor power busses, generators,...

Maretron

Maretron J2K100 NMEA 2000 / J1939 Bridge [J2K100-01]

J2K100 NMEA 2000® / J1939 Bridge (Engine/Transmission/Genset Gateway)Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital...