NMEA Cables & Sensors

Maretron

Maretron FFM100 Fuel Flow Monitor [FFM100-01]

Fuel Flow MonitorPart #: FFM100-01Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering...

Maretron

Maretron NMEA 2000 Network Bus Extender [NBE100-01]

Network Bus ExtenderPart #: NBE100-01Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. The NBE100 solves bus errors and other electrical issues...

Maretron

Maretron DCR100-01 Direct Current Relay Module [DCR100-01]

Maretron's DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000 network, so you can turn on and off the relays from any device onboard or remotely running Maretron's N2KViewr...

Maretron

Maretron FPM100 Fluid Pressure Monitor [FPM100-01]

Fluid Pressure MonitorMaretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the...

Maretron

Maretron TMP100 Temperature Module [TMP100-01]

Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20...

Furuno

Furuno GP330B GPS/WAAS Sensor f/NMEA2000 [GP330B]

GP330BThe GP-330B is a high performance GPS Receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. The GP330B is capable of data output...

Maretron

Maretron SIM100 Switch Indicator Module [SIM100-01]

SIM100 Switch Indicator ModuleMaretron's Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (heat, smoke, carbon monoxide, explosive vapor detectors), security systems (motion, vibration, glass break,...

Maretron

Maretron RIM100 Run Indicator Module [RIM100-01]

RIM100 Run Indicator ModulePart #: RIM100-01Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally as...

Maretron

Maretron ACM100 Alternating Current Monitor [ACM100-01]

ACM100 Alternating Current MonitorMaretron's ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. The ACM100 can monitor power busses, generators,...

Maretron

Maretron RAA100 Rudder Angle Adapter [RAA100-01]

RAA100 NMEA 2000®Rudder Angle AdapterThe RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000®...

Maretron

Maretron J2K100 NMEA 2000 / J1939 Bridge [J2K100-01]

J2K100 NMEA 2000® / J1939 Bridge (Engine/Transmission/Genset Gateway)Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital...