Fuel Hose & Fittings

Attwood Marine

Attwood 3/8" Hose Mender In-Line Fuel Splice Kit w/SS Clamps [11822-6]

3/8" Hose Mender In-Line Fuel Splice Kit with Stainless Steel ClampsWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3/8-inch lines. Machined...

Attwood Marine

Attwood Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb [14540-6]

Universal Brass Fuel Hose Fitting - 1/4" NPT x 3/8" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:Fitting is suitable for use with leaded, unleaded,...

Attwood Marine

Attwood Suzuki 3/8" Barb Female Hose Fitting - Under 75HP [88FTS014-6]

Suzuki 3/8" Barb Female Hose Fitting - Under 75HPQuick-connect female fitting for use on both ends of fuel lines to connect to tank fitting and engine. Fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol-blended, and...

Attwood Marine

Attwood Chrysler Female Hose Fitting - 3/8" Barb [8884-6]

Chrysler Female Hose Fitting - 3/8" BarbThis Attwood Chrysler Engine Fuel Hose Fitting provides for the precise and effective installation of a fuel line to a Chrysler-brand engine. This Fuel Hose Fitting is a female fitting that connects to the engine...

Attwood Marine

Attwood Chrysler/Suzuki Tank Fitting - 1/4" NPT Thread [14509-6]

Chrysler/Suzuki Tank Fitting - 1/4" NPT ThreadThis Attwood Fuel Tank Male Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all...

Attwood Marine

Attwood Honda 3/8" Barb Female Hose Fitting - Engine End [8900-6]

Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included...

Attwood Marine

Attwood Honda Tank Fitting - 1/4" NPT Thread - 90HP+ [8901-6]

Honda Tank Fitting - 1/4" NPT Thread - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and...

Attwood Marine

Attwood Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" Barb [88FHY516-6]

Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included...

Attwood Marine

Attwood Yamaha Tank Fitting - 1/4" NPT Thread [8897-6]

Yamaha Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner...

Attwood Marine

Attwood Johnson/Evinrude/OMC Female Hose Fitting - Tank Or Engine End - 3/8" Barb [8889LP6]

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:Johnson, Evinrude,...

Attwood Marine

Attwood Johnson/Evinrude/OMC Female Hose Fitting - Tank Or Engine End - 5/16" Barb [88FHE516-6]

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:Johnson, Evinrude,...

Attwood Marine

Attwood Johnson/Evinrude/OMC Male Tank Fitting - 1/4" NPT [8883-6]

Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses...