Hardware

Barton Marine

Barton Marine SkyLock 400 [N09411]

SkyLock 400The Barton SkyLock is an integral part of the SkyDock lifting system. The clever design and positioning of the locking cams mean the control line will never slip even when accidentally released.Manufactured in our factory using 316 stainless...

C. Sherman Johnson

C. Sherman Johnson "Captain Hook" Chain Snubber Small Snubber Hook f/1/4" 5/16" Chain w/12 of 1/2" 3 Strand Nylon [46-465]

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" & 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways:Use the claw and attached line to relieve tension from your windlass while...

Wichard Marine

Wichard Opening Luff Rope Prefeeder [7485]

Opening Luff Rope PrefeederFeatures:Single handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Barton Marine

Barton Marine Mast Base Organizer - 4 Block [81550]

Mast Base Organizer - 4 BlockThe Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish.It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck...

Barton Marine

Barton Marine Deck Organizer - Size 1 - 6 Sheave [81586]

Deck Organizer - Size 1 - 6 Sheave Designed for use when diverting mast base control lines and halyards back to the cockpit.  Allowing the crew to sail from from the security of the cockpit.Suitable for boats up to 32' (9.75 M) with halyard...

Wichard Marine

Wichard Opening Luff Rope Prefeeder [07485]

Opening Luff Rope PrefeederFeatures:Single-handed operation by pushing on the springEasy to install with a lashing or fixed to the forestayCan be installed below any headsail foil or headsail reefing configurationStainless steel forged...

Schaefer Marine

Schaefer Stainless Steel Cleat - 8" [60-200]

Stainless Steel Cleat - 8"8" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 5/8" (16mm), Length 8" (203mm), Height 2.0" (51mm), Fastener size 5/16" FH, Fastener center/center 2.0" (51mm), Weight 1...

Schaefer Marine

Schaefer 2-3/8" Aluminum Sheave [62-070-BW]

2-3/8" Aluminum SheaveFeatures:Material: AluminumMax Line 5/8" (16 mm)Max Wire 3/16" (5 mm)Outside Diameter 2-3/8" (60 mm)Inside Diameter 1/2" (13 mm)Width 3/4" (19 mm)

Ronstan

Ronstan Swivel Cleat Base [RF70]

Swivel Cleat BaseSwivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb)...

Schaefer Marine

Schaefer Investment Cast Pad Eye - 3" OD Base [78-17]

Investment Cast Pad Eye - 3" OD Base316 Stainless Steel includes delrin(tm) base. Order Backing Plate 97-54 separately.Specifications: Eye Width 1-1/8" (29 mm)Eye Height 7/8" (22 mm)Eye Stock 1/2" (13 mm)Length 3" (76 mm)Width 3" (76 mm)Fasteners...

ANDERSEN

ANDERSEN Large Bailer - Outside Mount [RA554136]

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...

ANDERSEN

ANDERSEN Super Max Bailer - Inside Mount [RA554133]

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of...